How to Make an ATM Skimmer

Most importantly, this is my first post. I’d prefer to express hello to everybody. I figured I would begin my post with something valuable. I assume no liability for these guidelines

These instructions are very good. I even have an extra Allumilite Kit for sale if anybody has trouble finding them.

Granted your results will be nowhere near as fantastic as Dron’s product.

It still proves it’s possible to make something from almost nothing.

You will need a

Dremel

MSR 500m http://www.msrfactory.com/msr500mwebsite.htm

Aluminite Starter Kit ht#p://www.alumilite.com/checkout/product_info.php?cPath=26&products_id=49

pcmetal putty ht#p://www.pcepoxy.com/puttyepoxies/pcmetal.asp

Fine grade sandpaper

Spraypaint

Depending on the type of skimmer you may need minor additional products to replica the unit.

The first thing you would need is to identify the type of skimmer you want to make.

Preferably choose one that is common in your area.

Once you had the type you need to obtain a copy of the original reader that your skimmer will be covering.

There are two ways to do this. You can either buy it as a replacement part online or make a copy.

To make a copy, open your aluminite starter kit and you will find clay bars.
Combine the bars into one.

Go to the atm and firmly press the clay onto the reader.
Pull it off gently and you should have an impression of the reader.
Take it home and use the resin mixture from your starter kit
to make a copy of the ATMs reader.
It dries hard in under 3 minutes.
You should now have at this point a replica of your target reader.
You may want to lightly spray wd40 before applying the clay to ensure
that you don’t leave clay residue.
Just be sure to wipe it clean after.
It’s best to do this very late at night to ensure no prying eyes.

Now that you have the replica of the reader.
Disassemble the msr500 completely out of its housing.
You will see that it is very simplistic in design.
The key part to making a skimmer is the position of the reader.
It must be in the correct position to read the cards properly.
So depending on the design of Dremel the head enclosure to be as small as possible.

The metal brackets holding it in is to ensure the reader has moved
to allow the card access to proceed past the head.
the smaller the better.

Use the pcmetal putty to accommodate for the necessary dremeled brackets.

Once you are at this stage, You need to design your skimmer.

Place your msr500 parts where it best fits on top of the replica reader.
It is good to place it in such a way that you can have access to turn it on and off.
I use a toothpick to ensure a channel to the on-off switch.
Apply one layer of saran wrap over your replica reader and MSR parts,
this is to ensure the clay does not stick to it.
Start placing the clay from your starter kit on top of the suran wrap
in such a way as to mimic the design of the original reader enclosure.
The readers are very basic and clay is very pliable,
so it should be rather easy to replicate a design.
make sure that everything is flat and smooth.

I use cards to ensure smooth lines and flat surfaces.
once you are happy with your design, gently lift off the clay.
You should have at this point a clay representation of your skimmer.
Use your starter kit and follow the directions on how to make a mold.
From the mold make a resin unit.
Place your msr500 parts into the unit the same way you had them laid out
on top of the original reader.
Use the pcmetal putty as needed to secure the parts
into the unit.

Next, sandpaper the rough edges and spray paint the unit the color to match the atm.
You are ready to test at this stage. Once you have successfully tested to ensure your skimmer lines up perfectly with the atm you’re ready to go. Use the pcmetal to create a good bond with the atm. it makes it hard to get off. Even if you break it, take it off. You still have the molds to make another.

WE ARE HERE FOR SERIOUS BUSINESS WE DO NOT ENTERTAIN OR RESPOND TO TIME WASTERS. WE HOPE YOU ARE AS SERIOUS AS WE ARE

Contact us for support. We sell fresh tools like CVV & Cards, SSN, Paypal accounts, Dumps with Pin, ATM Skimmers, Email Leads, Smtp, and lots more.
We have other services like Bank transfers to any bank account, we can Cards anytime for you and ship for half the price, Carding iPhone 11 pro, Botnet setup service, and Carding Classes where you will learn everything that will help you make money.

Lists Of Transfers Available for Grabs

You can make a lot of money as your mind can conceive. You don’t necessarily need to 9 am – 5 pm job to have a life. Live Your dreams, buy that house, go on that vacation, buy that dream car, and invest in real estate with these transfers.

Paypal Transfer —————————————Click Here

Cashapp transfer ————————————-Click Here

Western Union Transfer —————————Click Here

Bank transfer ——————————————Click Here

Venmo transfer —————————————Click Here